Cisco C9105AXW-S

Mã SP: Đánh giá: Bình luận 0 Lượt xem: 403

C9105AXW-S Cisco Catalyst 9105AX Access Point: Wall Plate, with internal antennas, Wi-Fi 6, 2x2 MIMO with two spatial streams, and S regulatory domain. Giá bán : Liên hệ để có giá tốtTình trạng : Còn hàng

Xem thêm >

Giá SVC: Liên hệ

Chính Hãng

Số lượng:

- +

Thêm vào giỏ hàng Đặt mua ngay Mua trả góp

Chấp nhận thanh toán

Khuyến mại

Gọi Hotline 0963.994.664 nhận ngay ưu đãi!

Tùy chọn sản phẩm

Tình trạng kho hàng

Còn hàng

SVC cam kết

100% sản phẩm chính hãng 100% sản phẩm mới

Chính sách bán hàng & bảo hành

Mua hàng trả góp lãi xuất 0% Chi tiết Giao hàng nhanh 2h và miễn phí giao hàng từ 500.000đ Chi tiết Ưu đãi vàng dành cho khách hàng doanh nghiệp Chi tiết Chính sách đổi trả miễn phí Chi tiết Dịch vụ bảo hành chuyên nghiệp, uy tín Chi tiết

Tư vấn mua hàng

Mr Đạt: 0984.579.880

Mr Anh - 0963.994.664 Ms Linh - 0987.468.902

Bảo hành

CSKH 01 - 0984.579.880

Mô tả sản phẩm

Thiết bị Wifi Cisco Catalyst 9105AX Access Point Wall Plate, with internal antennas

Part Number	C9105AXW-S
Software	Catalyst 9105AXW ● Cisco Unified Wireless Network Software Release 8.10MR3 or later ● Cisco IOS® XE Software Release 17.3.1 or later
Supported wireless LAN controllers	● Cisco Catalyst 9800 Series Wireless Controllers ● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities	● 2x2 MIMO with two spatial streams ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g ● 20- and 40-MHz channels ● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support
802.11ac	● 2x2 downlink MU-MIMO with two spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80- MHz channels ● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA3 support
802.11ax	● 2x2 uplink/downlink MU-MIMO with two spatial streams ● Uplink/downlink OFDMA ● TWT ● BSS coloring ● MRC ● 802.11ax beamforming ● 20-, 40-, 80- channels ● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA3 support
Integrated antenna	Catalyst 9105AXW ● 2.4 GHz: Peak gain 3 dBi, internal antenna ● 5 GHz: Peak gain 5 dBi, internal antenna
Interfaces	Catalyst 9105AXW ● 1x 100/1000/2500 Base-T (Ethernet) Uplink Interface ● 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget) ● Management console port (RJ-45) ● USB 2.0 at 4.5W ● Passthru Port
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	● Access point (without mounting brackets): ◦ C9105AXW: 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm)
Weight	Cisco Catalyst 9105AXW ● 0.8 lb. (373.2g)
Input power requirements	● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE®) ● Cisco power injector, AIR-PWRINJ6= ● 802.3af PoE ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
Environmental	Cisco Catalyst 9105AXW ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft (3000 m) Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2x2 to 1x1 on the 2.4 GHz radio and the USB interface and LAN1 PSE will be disabled.
Available transmit power settings (Max/Min)	● 2.4 GHz ◦ 20 dBm (100 mW) ◦ -7 dBm (0.2 mW)	● 5 GHz ◦ 20 dBm (100 mW) ◦ -7 dBm (0.2 mW)

Nếu bạn có bất kỳ câu hỏi nào về sản phẩm, hãy để lại câu hỏi ngay bên dưới hoặc liên hệ ngay với đội ngũ chuyên viên tư vấn của SVC Computer ngay nhé! Chúng tôi sẽ giúp bạn!

Xem thêm

Thiết bị Wifi Cisco Catalyst 9105AX Access Point Wall Plate, with internal antennas

Part Number	C9105AXW-S
Software	Catalyst 9105AXW ● Cisco Unified Wireless Network Software Release 8.10MR3 or later ● Cisco IOS® XE Software Release 17.3.1 or later
Supported wireless LAN controllers	● Cisco Catalyst 9800 Series Wireless Controllers ● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities	● 2x2 MIMO with two spatial streams ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g ● 20- and 40-MHz channels ● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support
802.11ac	● 2x2 downlink MU-MIMO with two spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80- MHz channels ● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA3 support
802.11ax	● 2x2 uplink/downlink MU-MIMO with two spatial streams ● Uplink/downlink OFDMA ● TWT ● BSS coloring ● MRC ● 802.11ax beamforming ● 20-, 40-, 80- channels ● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA3 support
Integrated antenna	Catalyst 9105AXW ● 2.4 GHz: Peak gain 3 dBi, internal antenna ● 5 GHz: Peak gain 5 dBi, internal antenna
Interfaces	Catalyst 9105AXW ● 1x 100/1000/2500 Base-T (Ethernet) Uplink Interface ● 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget) ● Management console port (RJ-45) ● USB 2.0 at 4.5W ● Passthru Port
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	● Access point (without mounting brackets): ◦ C9105AXW: 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm)
Weight	Cisco Catalyst 9105AXW ● 0.8 lb. (373.2g)
Input power requirements	● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE®) ● Cisco power injector, AIR-PWRINJ6= ● 802.3af PoE ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
Environmental	Cisco Catalyst 9105AXW ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft (3000 m) Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2x2 to 1x1 on the 2.4 GHz radio and the USB interface and LAN1 PSE will be disabled.
Available transmit power settings (Max/Min)	● 2.4 GHz ◦ 20 dBm (100 mW) ◦ -7 dBm (0.2 mW)	● 5 GHz ◦ 20 dBm (100 mW) ◦ -7 dBm (0.2 mW)

Thông số kỹ thuật

Part Number	C9105AXW-S
Software	Catalyst 9105AXW ● Cisco Unified Wireless Network Software Release 8.10MR3 or later ● Cisco IOS® XE Software Release 17.3.1 or later
Supported wireless LAN controllers	● Cisco Catalyst 9800 Series Wireless Controllers ● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities	● 2x2 MIMO with two spatial streams ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g ● 20- and 40-MHz channels ● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support
802.11ac	● 2x2 downlink MU-MIMO with two spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80- MHz channels ● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA3 support
802.11ax	● 2x2 uplink/downlink MU-MIMO with two spatial streams ● Uplink/downlink OFDMA ● TWT ● BSS coloring ● MRC ● 802.11ax beamforming ● 20-, 40-, 80- channels ● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA3 support
Integrated antenna	Catalyst 9105AXW ● 2.4 GHz: Peak gain 3 dBi, internal antenna ● 5 GHz: Peak gain 5 dBi, internal antenna
Interfaces	Catalyst 9105AXW ● 1x 100/1000/2500 Base-T (Ethernet) Uplink Interface ● 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget) ● Management console port (RJ-45) ● USB 2.0 at 4.5W ● Passthru Port
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	● Access point (without mounting brackets): ◦ C9105AXW: 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm)
Weight	Cisco Catalyst 9105AXW ● 0.8 lb. (373.2g)
Input power requirements	● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE®) ● Cisco power injector, AIR-PWRINJ6= ● 802.3af PoE ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
Environmental	Cisco Catalyst 9105AXW ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft (3000 m) Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2x2 to 1x1 on the 2.4 GHz radio and the USB interface and LAN1 PSE will be disabled.
Available transmit power settings (Max/Min)	● 2.4 GHz ◦ 20 dBm (100 mW) ◦ -7 dBm (0.2 mW)	● 5 GHz ◦ 20 dBm (100 mW) ◦ -7 dBm (0.2 mW)

Đánh giá và nhận xét

0 đánh giá Cisco C9105AXW-S

Tin tức liên quan

Sản phẩm tương tự

Sản phẩm đã xem

CHÍNH SÁCH GIAO HÀNG Nhận hàng và thanh toán tại nhà
ĐỔI TRẢ DỄ DÀNG Dùng thử trong vòng 3 ngày
THANH TOÁN TIỆN LỢI Trả tiền mặt, CK, trả góp 0%
HỖ TRỢ NHIỆT TÌNH Tư vấn, giải đáp mọi thắc mắc

Số 3 Ngõ 9 Đường 800A, Phường Nghĩa Đô, Quận Cầu Giấy, Hà Nội, Việt Nam

Kinh doanh online: 0984.579.880

Kinh doanh dự án: 0963.994.664

Email: cskh.svcvietnam@gmail.com

Xem giao diện bản PC

CÔNG TY TNHH CÔNG NGHỆ SVC VIỆT NAM - Địa chỉ: Nhà 29 Ngách 25 Ngõ 83 đường Ngọc Hồi, Phường Hoàng Liệt, Quận Hoàng Mai, Thành Phố Hà Nội, Việt Nam
Giấy CN đăng ký kinh doanh và mã số thuế: 0108940873 do sở Kế hoạch & Đầu tư thành phố Hà Nội cấp